Call or Text: 8-715-2848 | 8-668-5818 | 0917-6230556 | Email: goldapextools@gmail.com

Dremel 409 Thin Cut-off Wheels (36pcs)

  • Sale
  • ₱460


Dremel 409
Cut-off Wheels (36pcs)
For cutting metal with limited use on wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood, and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
  • Use with mandrel 402
  • Makes it easy to cut or slot bolts and screws
  • Use on sheet metal, thin wood & plastic
  • Cuts only along its edge
  • 0.025" thick, 36 per vial
User Tips
  • The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
  • Secure objects to a stable surface while working.
  • Hold the tool so that the wheel is at a perpendicular angle to the material being cut.
  • Keep a light touch, as the wheel will break under too much pressure. If chattering occurs, increase speed.
  • Plastics require very slow speeds, because they tend to melt at the contact point. Wood requires low speeds also, always experiment on a scrap first.
Specifications:
Shank diameter: 3,2 mm
Working diameter: 24,0 mm
Max working depth: 10,0 mm
Maximum RPM: 35.000 1/min